Trimble: R8 GPS |
|
| Code-differential GNSS positioning | |
| – Horizontal | 0,25 m + 1 ppm RMS |
| – Vertical | 0,50 m + 1 ppm RMS |
| Accuracy SBAS differential positioning | Typical |
| Static GNSS measurement | |
| Static with high accuracy | |
| – Horizontal | 3 mm + 0,1 ppm RMS |
| – Vertical | 3,5 mm + 0,4 ppm RMS |
| Static and FastStatic | |
| – Horizontal | 3 mm + 0,5 ppm RMS |
| – Vertical | 5 mm + 0,5 ppm RMS |
| Postprocessed kinematic (PPK) GNSS measurement | |
| – Horizontal | 8 mm + 1 ppm RMS |
| – Vertical | 15 mm + 1 ppm RMS |
| Real Time Kinematic (RTK) measurement | |
| One baseline <30 km | |
| – Horizontal | 8 mm + 1 ppm RMS |
| – Vertical | 15 mm + 1 ppm RMS |
| Network RTK | |
| – Horizontal | 8 mm + 0,5 ppm RMS |
| – Vertical | 15 mm + 0,5 ppm RMS |
| Initialisation time | 2 to 8 seconds |
| Initialisation time | Typical >99,9% |
Trimble: R10 GPS |
|
| Code-differential GNSS positioning | |
| – Horizontal | 0,25 m + 1 ppm RMS |
| – Vertical | 0,50 m + 1 ppm RMS |
| SBAS positioning | Typical |
| Static GNSS measurement | |
| Static with high accuracy | |
| – Horizontal | 3 mm + 0,1 ppm RMS |
| – Vertical | 3,5 mm + 0,4 ppm RMS |
| Static en FastStatic | |
| – Horizontal | 3 mm + 0,5 ppm RMS |
| – Vertical | 5 mm + 0,5 ppm RMS |
| Real Time Kinematic (RTK) measurement | |
| One baseline <30 km | |
| – Horizontal | 8 mm + 1 ppm RMS |
| – Vertical | 15 mm + 1 ppm RMS |
| Network RTK | |
| – Horizontal | 8 mm + 0,5 ppm RMS |
| – Vertical | 15 mm + 0,5 ppm RMS |
| RTK boot time for specified precision | 2 tot 8 seconden |
| Trimble CenterPoint RTX | |
| – Horizontal | 4 cm |
| – Vertical | 9 cm |
| – RTX convergence time for specified precision | 30 minuten of minder |
| – RTX QuickStart convergence time for specified precision | 5 minuten of minder |
| Trimble xFill | |
| – Horizontal | RTK6 + 10 mm/minuut RMS |
| – Vertical | RTK6 + 20 mm/minuut RM |
Trimble: S3 Total Station |
|
| Specifications | |
| Angle measurement | |
| Accuracy | 2″ (0,6 mgon) |
| (standard deveation based on DIN 18723) | 5″ (1,5 mgon) |
| Angle measurement (smallest count) | |
| – Standard | 1″ (0,3 mgon) |
| – Tracking | 2″ (0,6 mgon) |
| – Average observations | 0,1″ (0,03 mgon) |
| Automatic level compensator | |
| – Type | Centered twin axle |
| – Accuracy | 0,5″ (0,15 mgon) |
| – Reach | 5″ (±100 mgon) |
| Distance measurement | |
| Accuracy (RMSE) | |
| Prism mode | |
| – Standard | 2 mm + 2 ppm |
| – Standard deviation according to ISO17123-4 | 1,5 mm + 2 ppm |
| – Tracking | 5 mm + 2 ppm |
| DR-mode | |
| – Standard measurement | 3 mm + 2 ppm |
| – Tracking | 10 mm + 2 ppm |
| Measurement time | |
| Prism mode | |
| – Standard | 2 s |
| – Tracking | 0,4 s |
| DR-mode | |
| – Standard | 3-15 s |
| – Tracking | 0,4 s |
| Reach (in clear standard conditions) | |
| Prism mode | |
| 1 prism | 2.500 m |
| 3 prismas | 5.000 m |
| Shortest reach possible | 1,5 m |
Trimble: S6 Total Station |
|
| Specifications | |
| Angle measurement | |
| Sensor type | Absolute encoder with diametric display |
| Accuracy | 2″ (0,6 mgon |
| (standard deviation based on DIN 18723) | 5″ (1,5 mgon) |
| Angle measurement (smallest count) | |
| – Standard | 1″ (0,3 mgon) |
| – Tracking | 2″ (0,6 mgon) |
| – Average observations | 0,1″ (0,03 mgon) |
| Automatic level compensator | |
| – Type | Centered twin axle |
| – Accuracy | 0,5″ (0,15 mgon) |
| – Reach | 5″ (±100 mgon) |
| Distance measurement | |
| Accuracy (RMSE) | |
| Prism mode | |
| – Standard | 2 mm + 2 ppm |
| – Standard deviation according to ISO17123-4 | 1,5 mm + 2 ppm |
| – Tracking | 4 mm + 2 ppm |
| DR-mode | |
| – Standard measurement | 2 mm + 2 ppm |
| – Tracking | 4 mm + 2 ppm |
| Measurement time | |
| Prism mode | |
| – Standard | 1,2 s |
| – Tracking | 0,4 s |
| DR-mode | |
| – Standard | 1-5 s |
| – Tracking | 0,4 s |
| Reach (in clear standard conditions) | |
| Prism mode (in normal, clear conditions) | |
| 1 prism | 2.500 m |
| 3 prismas | 5.500 m (max. reach) |
| Shortest reach possible | 0,2 m |
Trimble: S8 Total Station |
|
| Specifications (DR Plus) | |
| Angle measurement | |
| Accuracy | |
| (standard deviation based on DIN 18723) | 1″ (0,3 mgon) |
| Angle measurement (smallest count) | 0,1″ (0,01 mgon) |
| Sensor type | Absolute encoder with diametric display |
| Distance measurement | |
| Accuracy (RMSE) | |
| Prism mode | |
| – Standard | 2 mm + 2 ppm |
| – Standard deviation according to ISO17123-4 | 1 mm + 2 ppm |
| – Tracking | 4 mm + 2 ppm |
| DR-mode | |
| – Standard | 2 mm + 2 ppm |
| – Tracking | 4 mm + 2 ppm |
| Measurement time | |
| Prism mode | |
| – Standard | 1,2 s |
| – Tracking | 0,4 s |
| DR-mode | |
| – Standard | 1-5 s |
| – Tracking | 0,4 s |
| Reach | |
| Prism mode (in clear standard conditions) | |
| 1 prism | 2.500 m |
| 3 prismas | 5.500 m (max. reach) |
| Shortest reach possible | 0,2 m |
Trimble: Yuma 2 Rugged Tablet Computer GLX |
|
| Environment specifications | |
| Certified according to IP65 and MIL-STD-810G | |
| Water | Resistant to hard rain and water splashes, IEC-60529 IP-6X jet of water, any direction, jet of water 6,3 mm diameter from 2,5 – 3 m, 12,5 liter/minute. |
| Dust | Protected against dust: IEC 60529, IPX5 dustroom under pressure. |
| Dropping | Resistant to multiple drops of 1,22 m MIL-STD-810G, Method 516.6 Procedure IV, Transit Drop. |
| Temperature, usage | 0 °C to +60 °C MIL-IL-STD-810G, Method 502.5 Procedure II & III (low temp. usage); Method 501.5 Procedure II (high temp, usage). |
| Temperature, preserve | 0 °C to +70 °C MIL-IL-STD-810G, Method 502.5 Procedure I (low temp. preserve), Method 501.5, Procedure I (high temp. preserve). |
| Temperature shock | Switch between -30 °C and +60 °C MIL-STD-810G, Method 503.5, Procedure I-C (temperature shock, usage). |
| Humidity | Switch between -30 °C and +60 °C at 90% RH, MIL-STD-810G, Method 507.5, Procedure II (humidity, aggravated cycle). |
| Height | Use at 4.572 m at 23 °C, MIL-STD-810G, Method 500.5, (height) Procedure I, II & III. |
| Vibrations | General minimum integrity and loose cargo testing. MIL-STD-810G, Method 514.6, Procedure I Procedure II, Category 5 (vibrations: truck/trailer/loose cargo, Appendix C, figure 514.6C-4, Tabel 514,6C-I, one hour). |
| Exposure to sunlight | MIL-STD-810G, Method 505.5, Procedure II, exposure to sunlight. |
| Exposure to chemicals | Resistant to mild alkaline and acidic cleaning solutions, fuel hydrocarbons, alcohol and common lubricants for vehicles and industrial machines. |
| Physical | |
| Dimensions (LxWxH) | 246 x 160 x 40 mm |
| Weight | 1,2 kg with regular batteries 1,4 kg with extended batteries |
| Keys | Six keys (login, on/off, function, 3 function keys programmed by the user ) and 5-way arrow key pad. |
| Hardware specifications | |
| Processor | 1,6 GHz Intel Atom N2600 dual-core processor |
| Memory | 4 GB DDR3 DRAM volatile memory |
| Storage | 64 GB or 1128 GB SD (Improved GPS: only 128 GB SSD) |
| Extension | MicroSD card slot, SIM card slot |
| Screen | 7” 1024 x 600 hybrid reflective and transmissive (transflective) with capacitive touchscreen |
| Batteries* | • Smart batteries with LED capacity indicators • Regular batteries: two 7,5 V, 3000 mAh, 21,6 Wh • Optional extended batteries: two 7,5 V, 600 mAh, 43,2 Wh |
| Inputs/outputs | 3,5 mm audio jack, USB Host (2), HDMI, docking station input/output board, DC voltage input |
| GPS | 1-2 meter precision (with SBAS) or 2-4 meter precision (with SBAS) |
| Radios | Bluetooth 4.0; Wi-Fi b/g/n |
| WWAN radios | Penta-band GSM 3.75 only-data module |
| Certificates FCC, CE, UL 60950, IC (Canada), conform RoHS. SAIFE, MIL461, RSS 210, CSA, RSS CSA C22.2, IEC 60950, A-Tick, C-Tick Mark for Australia and New-Zealand*(Battery life depends on energy settings, usage patterns, environmental factors. Regular batteries life approx. 5 hours; extended batteries life approx. 10 hours.) |
|